Our High Quality Carbon Fiber Panels are Low Cost too.

Our volume keeps our prices low, lower than most actually.  We know we aren't the cheapest - and for good reason.  We are competing on top end quality, and in this case, you clearly get what you pay for. 

All of our carbon sheets have an amazing 3-D, light shifting effect.  From our Carbon Fiber Veneer to our thicker carbon panels, just turn the sheets back and forth and the pattern seems to shift like a hologram.  Only Protech Composites can make a Carbon Fiber Laminates look and feel this good. 

We don't use sneaky tricks to make our sheets seem thicker.  All the way through our products, you get 100% real carbon fiber, from the front to the back.  No buildups, fillers, gelcoats, or surface treatments to hide flaws.  Just pure high gloss carbon fiber perfection!

Our Carbon Fiber sheets are UV resistant too!  Other Carbon Fiber veneers hide this important fact.  Go ahead, check closely, it's often buried somewhere in their FAQ sections.  Using Carbon Fiber Sheets that are not UV resistant will lead to yellowing, cracking, and discoloration overtime.  Protech Composites uses a special blend of crystal clear, UV resistant EPOXY in every sheet we make.

Why are Our Carbon Sheets Better?

High Gloss, Mirror shine finish right from the tool, no tricks or over coat
Durable, long lasting EPOXY RESINS (not cheap polyester resins)
Perfectly flat and level - no waves, twists, or bumps
UV Resistant formulation for lasting beauty.
Our panels cut clean and easy - no fuzzy edges
First quality aerospace grade Carbon Fiber Fabrics
Genuine 3M Adhesive - High performance, high temp
All of our products are quality made by us right here in the USA
 

Buy Carbon Fiber Sheets ONLINE Today!

Visit our ONLINE STORE to make your purchase of carbon sheets, or continue reading for more information.  Don't forget to check out our FAQ's page for additional information on our Carbon Fiber.

Want MORE information on our Carbon Fiber Sheets?

The finished side of our crystal clear carbon fibre panels have a mirror like, glossy finish - smooth and flat.  No waves or bumps in these carbon fiber sheets!  The back side of every carbon panel has a fine texture, ready to stick to your surface with glue or tape. 

This surface finish comes straight from our tooling and the epoxy resin used to fabricate the carbon fiber veneer and Sheet - No over coating or spray on finishes to ruin the fantastic 3-D fabric patterns.  If you hold the panel in just the right light, you can see a your own reflection (similar to the pictures above). 

    NOTE: Our carbon fiber panels are not altered in any way.  What you see on this site is what you get!  No photoshoping, no superimposed pictures, just beautiful panels in everyday light.

All of our carbon fiber sheets are made from 100% real carbon fiber.  Our stunning 2x2 twill weave (zigzag look) fabric is woven to exacting aerospace standards, yielding a perfect weave pattern every time.   Tilt the panel back and forth and watch the 3-D textures change under the light.  

We only use Aerospace grade fabrics and UV resistant epoxy resins to ensure lasting beauty and durability.  Our resins are crystal clear, ensuring your carbon fibre veneer always shines though.....crystal clear.  We use a special structural epoxy resin system to assure high strength and lasting durability.  Our epoxy resin is UV stabilized to resist fading and yellowing over time.  Our carbon fiber sheets are created perfectly flat, but the thinner versions can be easily bent and formed around tight curved surfaces.  All of our carbon veneers and panels cut cleanly due to our special blend of high strength Epoxy resins.  (Carbon fiber and carbon fibre are the same, just spelled differently)

3M Adhesive Backing

We also offer optional 3M high performance, high temperature sheet adhesive (Only the best - 200MP type 3M Adhesive Transfer Tape - a full 5 mils thick!).  Order your carbon fiber sheets with adhesive and we will supply enough 3M sheet adhesive to cover the entire carbon fiber panel.  This adhesive sheet is rated by 3M for applications up to 400F!

The 3M Adhesive is shipped unattached so you can cut and form the carbon fiber sheet or adhesive to your liking, then apply the adhesive as you wish.  You won't find this feature with anyone else!!


Custom Sizes & Wholesale Prices

Yes, we can make custom sized carbon fiber panels and special order thicknesses.  We will work with you on different weaves and fabric styles as well.  We do NOT make one-off custom sized parts.   

Minimum order quantities are required to make custom sized carbon sheets cost effective.  Due to our volume and desire to keep costs under control, we just don't offer small quantity customization.  Generally a minimum of 10 pieces of each type is required for a special order.  Please email or call us with your specifications and desired quantity for a custom quote.

Do you purchase and sell carbon fiber sheets on your website?  If so, then we want you to carry our products.  We offer great wholesale pricing for large volume buyers.  Why lower your brand name by offering imported, low quality carbon fiber laminate when you can offer the best looking product on the market!  No one beats our quality, guaranteed! 

What our customers are saying:

"Carbon fiber sheet is beautiful and easy to cut. Thanks!"
"Very nice carbon panel works great will be buying more thankxxxxx."
"Best carbon sheet ever - amazing surface finish!" High class!!"
"Beautiful piece, Fast shipping, well packaged A+A+A+A+A+A+A"
"Everything positive...great product and fast shipping....Thanks...."
"Carbon Fiber Veneer looks awesome!! Fast shipping, great product. Thxs"
"Shipped right away.  Nice glossy finish.  Thank You!!!"

    We have 100% positive feedback - Buy with confidence

Purchase Carbon Fiber Sheets Online Now!

Get more information, like how to cut and use the products, on our FAQ's page including info about our sheets, sizes, thicknesses, shipping, and how to work with the Carbon Fiber Sheets and carbon fiber veneers.